Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engrave

Tutorial of installing the LU3-20A Laser Module
on Ortur Laser Engraver

The 20W laser module is not only upgraded in terms of power, it applies advanced COS technology, which presses four 5W diodes into an extremely fine beam and maintains a powerful energy, enabling speeds of up to 20,000mm/min and perfect single cuts. In addition, it can also achieve colorful engraving effects on stainless steel, so you are no longer limited to black and white creations.

It is important to note that the 20W laser module is compatible with all of Ortur's laser engraving machines, but don't worry, the installation of the 20W laser module is very simple. This article will explain in detail how to install the 20W laser module on other laser engraving machines and there will be a video tutorial, so be sure to read it carefully!

Installed on Ortur Laser Master 3

· Install and fix the LU3-20A laser moudule with thumbscrew.

OLM3-1.png__PID:cd4699e1-55ec-4388-ab99-12309263926e

· Because of the power upgrade, the 20W laser module needs to be used with an OUC adapter board. Please note that when fixing the OUC adapter plate, please reserve the movable position of the laser module.

OLM3-2.png__PID:aeaebb49-4a31-4e1a-932f-e4e5ff382a3d
OLM3-3.png__PID:aebb494a-311e-4ad3-afe4-e5ff382a3dd7

· Plug the LU3-20A laser module laser dedicated line and the OLM3 cable into the corresponding position on the adapter board.

OLM3-4.png__PID:bb494a31-1e1a-432f-a4e5-ff382a3dd7bf
OLM3-5.png__PID:494a311e-1ad3-4fe4-a5ff-382a3dd7bf58

· The OUC requires an external power supply.

OLM3-6.png__PID:4a311e1a-d32f-44e5-bf38-2a3dd7bf5831
OLM3-7.png__PID:f453e94d-5ce1-461e-be57-4104017bc2e4

· It is necessary to install the limit screws into the second hole, so that the module will not collide with the frame, and at the same time, the engraving area will become 400mm*380mm.

OLM3-8.png__PID:53e94d5c-e186-4e3e-9741-04017bc2e461
OLM3-9.png__PID:e94d5ce1-861e-4e57-8104-017bc2e4611c

The above are installed after the 20W laser module is installed, it is best to use with the air pump together!

After all the above are installed 20W laser module is installed, it is best to use with the air pump.If you are still not sure how to operate, you can view the detailed installation video below.

Installed on Ortur Laser Master 3 LE

· Replacement of the 20W laser module, removal of the OLM3 LE original fixing bracket.

LE.png__PID:133183ff-246b-4030-b275-252027b2b0de
LE-0.png__PID:3183ff24-6b60-40b2-b525-2027b2b0de7d

·  Attach the fixing bracket for the OUC adapter plate.

LE-2.png__PID:ff246b60-30b2-4525-a027-b2b0de7d6b5e
LE-3.png__PID:246b6030-b275-4520-a7b2-b0de7d6b5e33

· Plug all laser harnesses into the corresponding ports

LE-4.png__PID:24181804-128e-4674-a4fd-720fd1dd1b8e
LE-5.png__PID:18180412-8e16-44a4-bd72-0fd1dd1b8e32
LE-6.png__PID:1804128e-1674-44fd-b20f-d1dd1b8e32df

· The OUC requires an external power supply. 

LE-7.png__PID:04128e16-74a4-4d72-8fd1-dd1b8e32df65
LE-8.png__PID:128e1674-a4fd-420f-91dd-1b8e32df6596

· All wiring harnesses need to be organized to ensure that they do not interfere with the movement of the laser module. And you need to adjust the position of the limit screws to prevent collisions.

LE-9.png__PID:e30602dc-5a9a-4a5d-87fd-6435fad1eb40
LE-10.png__PID:0602dc5a-9a0a-4d87-bd64-35fad1eb403a

The above are installed after the 20W laser module is installed, it is best to use with the air pump together!

Installed on Ortur Laser Master 2 Pro S2

· If your old laser module is the LU2-4 SF/LF, you will need to replace the back plate that holds the laser module in place.

1.png__PID:de55b0eb-0fda-400b-85da-b49cb4f4ae13

·  Connect the wiring harness of the 20W laser module and the wiring harness of the OLM2 PRO S2 to the corresponding excuses on the OUC adapter board.

2.png__PID:55b0eb0f-da40-4b05-9ab4-9cb4f4ae1309
3.png__PID:b0eb0fda-400b-45da-b49c-b4f4ae13099b

· Connect the OUC adapter plate to the dedicated power supply and tie the OUC in a position where it will not interfere with the operation of the machine.

5.png__PID:eb0fda40-0b05-4ab4-9cb4-f4ae13099bd3
6.png__PID:0fda400b-05da-449c-b4f4-ae13099bd362

·  In order to prevent the laser module from hitting the front frame, please adjust the limit screws and adjust the tension of the belt at the same time.

7.png__PID:d900bc49-211c-440c-a809-d74011f7fe33
8.png__PID:00bc4921-1c14-4ca8-89d7-4011f7fe336a
9.png__PID:bc49211c-140c-4809-9740-11f7fe336a8c

You can check out more details in the video!

Upgrade Your Machines

Ortur Laser Master 3 20w

 $889.99 $1099.99

 Code: HUNT20W

Shop Now

Ortur Laser Master 3 10w

$489.99 $699.99

 Code: HUNT10W

Shop Now
20w-bundles.png__PID:ee024704-4d09-40d5-be57-e47037bdff08

Tutorial of installing the
LU3-20A Laser Module

The 20W laser module is not only upgraded in terms of power, it applies advanced COS technology, which presses four 5W diodes into an extremely fine beam and maintains a powerful energy, enabling speeds of up to 20,000mm/min and perfect single cuts. In addition, it can also achieve colorful engraving effects on stainless steel, so you are no longer limited to black and white creations.

It is important to note that the 20W laser module is compatible with all of Ortur's laser engraving machines, but don't worry, the installation of the 20W laser module is very simple. This article will explain in detail how to install the 20W laser module on other laser engraving machines and there will be a video tutorial, so be sure to read it carefully!

Installed on Ortur Laser Master 3

· Install and fix the LU3-20A laser moudule with thumbscrew.

OLM3-1.png__PID:cd4699e1-55ec-4388-ab99-12309263926e

· Because of the power upgrade, the 20W laser module needs to be used with an OUC adapter board. Please note that when fixing the OUC adapter plate, please reserve the movable position of the laser module.

OLM3-2.png__PID:aeaebb49-4a31-4e1a-932f-e4e5ff382a3d
OLM3-3.png__PID:aebb494a-311e-4ad3-afe4-e5ff382a3dd7

· Plug the LU3-20A laser module laser dedicated line and the OLM3 cable into the corresponding position on the adapter board.

OLM3-4.png__PID:bb494a31-1e1a-432f-a4e5-ff382a3dd7bf
OLM3-5.png__PID:494a311e-1ad3-4fe4-a5ff-382a3dd7bf58

· The OUC requires an external power supply.

OLM3-6.png__PID:4a311e1a-d32f-44e5-bf38-2a3dd7bf5831
OLM3-7.png__PID:f453e94d-5ce1-461e-be57-4104017bc2e4

· It is necessary to install the limit screws into the second hole, so that the module will not collide with the frame, and at the same time, the engraving area will become 400mm*380mm.

OLM3-8.png__PID:53e94d5c-e186-4e3e-9741-04017bc2e461
OLM3-9.png__PID:e94d5ce1-861e-4e57-8104-017bc2e4611c

The above are installed after the 20W laser module is installed, it is best to use with the air pump together!

After all the above are installed 20W laser module is installed, it is best to use with the air pump.If you are still not sure how to operate, you can view the detailed installation video below.

Installed on Ortur Laser
Master 3 LE

· Replacement of the 20W laser module, removal of the OLM3 LE original fixing bracket.

LE.png__PID:133183ff-246b-4030-b275-252027b2b0de
LE-0.png__PID:3183ff24-6b60-40b2-b525-2027b2b0de7d

·  Attach the fixing bracket for the OUC adapter plate.

LE-2.png__PID:ff246b60-30b2-4525-a027-b2b0de7d6b5e
LE-3.png__PID:246b6030-b275-4520-a7b2-b0de7d6b5e33

· Plug all laser harnesses into the corresponding ports

LE-4.png__PID:24181804-128e-4674-a4fd-720fd1dd1b8e
LE-5.png__PID:18180412-8e16-44a4-bd72-0fd1dd1b8e32
LE-6.png__PID:1804128e-1674-44fd-b20f-d1dd1b8e32df

· The OUC requires an external power supply. 

LE-7.png__PID:04128e16-74a4-4d72-8fd1-dd1b8e32df65
LE-8.png__PID:128e1674-a4fd-420f-91dd-1b8e32df6596

· All wiring harnesses need to be organized to ensure that they do not interfere with the movement of the laser module. And you need to adjust the position of the limit screws to prevent collisions.

LE-9.png__PID:e30602dc-5a9a-4a5d-87fd-6435fad1eb40
LE-10.png__PID:0602dc5a-9a0a-4d87-bd64-35fad1eb403a

The above are installed after the 20W laser module is installed, it is best to use with the air pump together!

Installed on Ortur Laser Master
2 Pro S2

· If your old laser module is the LU2-4 SF/LF, you will need to replace the back plate that holds the laser module in place.

1.png__PID:de55b0eb-0fda-400b-85da-b49cb4f4ae13

·  Connect the wiring harness of the 20W laser module and the wiring harness of the OLM2 PRO S2 to the corresponding excuses on the OUC adapter board.

2.png__PID:55b0eb0f-da40-4b05-9ab4-9cb4f4ae1309
3.png__PID:b0eb0fda-400b-45da-b49c-b4f4ae13099b

· Connect the OUC adapter plate to the dedicated power supply and tie the OUC in a position where it will not interfere with the operation of the machine.

5.png__PID:eb0fda40-0b05-4ab4-9cb4-f4ae13099bd3
6.png__PID:0fda400b-05da-449c-b4f4-ae13099bd362

·  In order to prevent the laser module from hitting the front frame, please adjust the limit screws and adjust the tension of the belt at the same time.

7.png__PID:d900bc49-211c-440c-a809-d74011f7fe33
8.png__PID:00bc4921-1c14-4ca8-89d7-4011f7fe336a
9.png__PID:bc49211c-140c-4809-9740-11f7fe336a8c

You can check out more details in the video!

Upgrade Your Machines

Ortur Laser Master 3 20w

 $889.99 $1099.99

 Code: HUNT20W

Shop Now

Ortur Laser Master 3 10w

$489.99 $699.99

 Code: HUNT10W

Shop Now
bundles---ć‰ŻæœŹ2.png__PID:3970ae1f-08a4-4046-999f-f8fa81d88475

Keep in Touch with Ortur

Previous Blog

Next Blog

Previous Blog

Next
Blog

ZURÜCK NACH OBEN