Support for Aufero Laser 1
More beginner-friendly, no assembly
| Product | Aufero Laser 1 |
|---|---|
| Motherboard | OLM-PRO-V1.2 Motherboard,32Bits ESP32MCU |
| Firmware | OLF-V180 series Firmware |
| Safety Features | 1. Active Position Protection 2. Exposure Duration Detection and Limitation 3. Laser Beam Safety Guard 4. 24V Power Delivery System 5. Power control system, if shutdown the machine, it would cut the power. |
| Frame Materials | Aluminum Profile + Acrylic |
| Motors | NEMA 17 Stepper Motors |
| Mechanical Precision | Y:12.5um, X:12.5um |
| Pixel Accuracy | Adjustable (Default: 300 pixels per inch, about 0.81um Pixel Accuracy) |
| Engraving Area | 180mm×180mm |
| Available Laser Modules | LU2-2 Laser Module
(Real Luminous Power: 1,000-1,600mw) LU2-4-SF Short Focus Laser Module (Real Luminous Power: 4,500-5,500mw) LU2-4-LF Long Focus Laser Module (Real Luminous Power: 4,500-5,500mw) Every 50 hours of use, please clean the lens with a medical cotton swab and alcohol. |
| Wave Length | 445±5nm |
| Focus | Fixed Focus |
| Default Focal Length | 50mm (from the heat sink to the object) |
| Control Mode | PWM |
| Power Rate | S0-S1,000 |
| Engraving Speed | 0-5,000mm/min |
| Baud Rate | 115200 – 921600 (Default: 115200) |
| Computer OS | Win XP, Win 7, Win 8, Win 10 (LaserGRBL) Mac and Linux (LightBurn) |
| Control Softwares | LaserGRBL (free), LightBurn (Paid Software) |
| Input Format | JPG, JPEG, PNG, BMP, SVG, etc. |
| Available Materials of Engraving | Food, MDF, Paperboard, Black Acrylic, Leather, Stainless Steel, Power Coated Metal, Stone, etc. |
| Available Materials of Cutting | Plywood, Pine Board, Paperboard, Black Acrylic, Leather, Felt Cloth, etc. |
| Input Voltage | 110V-220V (Compatible) |
| Power Adapter Output | 24V/2A |
| Operating Temp | -20℃-50℃ |
