Support-OLM2 Pro S2 – Ortur
          
OLM3 10W.jpg__PID:412fe416-6c6c-4df4-b1f7-ab7c99881167
  • Power System: 24V
  • Engrave Area: 400mm x 400mm
  • Construction Material: Full Metal Construction
  • Maximum Engraving Speed: 15,000mm/min
  • Features:
      -Active Flame Detection
      -Emergency Stop
      -Exposure Duration and Limitation
      -Active G-shock Sensor
ProductOrtur Laser Master 2 Pro S2
MotherboardOLM-PRO-V10 Motherboard – 32Bits MCU
FirmwareOLF-V1.5 Firmware
Safety Features1. Active Position Protection
2. Exposure Duration Detection and Limitation
3. Laser Beam Safety Guard
4. Flame Detector
5. Emergency Stop Button
Frame MaterialsAluminum + Powder Coated Steel
MotorsNEMA 17 Stepper Motors
Mechanical PrecisionY:12.5umX:12.5um
Pixel AccuracyAdjustable – (Default: 300 DP; roughly0.81um Pixel Accuracy)
Available Laser Modules LU2-10A – Optical Power: >9500mW
LU2-4 SF– Optical Power: 5,000~5,500mmW
LU2-4 LF – Optical Power: 5,000~5,500mmW
Wave Length445±5nm
FocusFixed Focus
Focus400mm*400mm
Default Focal Length50mm (from the heat sink to the object)
Control ModePWM
Power RateS0-S1,000
Engraving Speed0-15,000mm/min
Baud Rate115200 – 921600 (Default: 115200)
Computer OSWin XP, Win 7, Win 8, Win 10 (LaserGRBL)
Mac and Linux (LightBurn)
Control SoftwaresLaserGRBL (free), LightBurn (Paid Software)
Input FormatJPG, JPEG, PNG, BMP, SVG, etc.
Available Materials of EngravingWood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.
Available Materials of CuttingWood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.
Input Voltage110V-220V (Compatible)
Power Adapter Output24V/2A
Operating Temp-20℃-50℃
        
ZURÜCK NACH OBEN