Aufero AL2 Laser Engraving & Cutting Machine 15,000mm/min (5W/1.6W)
Tax included. Shipping calculated at checkout
- The Fastest Entry-level Laser Engraver, up to 15,000mm/min when the stable situation.
- Designed with low gravity center of the X-axis, providing more stability.
- 4 Safety Protection: Active Position Protection, Exposure Duration Detection and Limitation, Laser Beam Safety Guard, Current Safety Control System.
- Aufero Laser 2 enjoys a 30-day return guarantee and a one-year warranty.
A Lot Faster Than the Typical
32-Bit MCU on the 9th Generation Motherboard Stepper motor speeds can be increased from 4000mm/min to 10,000mm/min or even 15,000mm/min thanks to the ESP32 MCU's motion algorithm and a low center of gravity.
The installation takes only 10 minutes
Whether or not you have already used a laser engraving machine, this is the best high-performance machine for novices.
Secure Design
A laser filter cover blocks 98 percent of the UV radiation. A light filter cover is attached to the laser head to keep animals from grabbing the laser spot. The laser will immediately shut off to prevent any harm if the machine is tilted or shifted, if the computer fails during engraving or if the motors stop moving.
Newest Compressed Focal Spot Laser Beam Innovations
Cutting depth of up to 12mm thick wood, 10mm acrylic, carving ceramics, and stainless steel can all be done with the latest Aufero AL2 5.5W high-compression focal point laser module diode.
【10W】Wood & Acrylic Cutting
One PASS-Without Pump
Wood (12mm)
Acrylic (1Omm)
Richer Application Scenarios
Basic Accessories
Significantly improves the engraving and cutting experience
Raising the Machine Height
Suitable for engraving and cutting taller objects, can be used with the Y-axis series
Multi-mode Y-axis Rotary Chuck
Suitable for engraving and cutting most cylinders, spheres and rings
For Safer Engraving
Provide you with a more secure engraving and cutting experience
Technical Specifications
You may also like
