Support-OLM H10 – Ortur
          
png.png__PID:85c2ebab-b442-49b8-bd36-a109551367a5
  • Power System: 24V 6Amp
  • Engrave Area: 300mmx300mm
  • Construction Material: 99% Aluminium Alloy + 1% Rubber
  • Maximum Engraving Speed: 20,000mm/min
  • Features:
      - 2.4G Wifi, USB, SD Card, FTP and WebUi Control
      - Exposure Duration and Limitation
      - Active G-shock and Gyroscopic Sensor
ProductOrtur Laser Master H10
MotherboardOLM-ESP-H10_V2.7
FirmwareESP_H10_218
Safety Features1. Active Position Protection
2. Exposure Duration Detection and Limitation
3. Laser Beam Safety Guard
4. Sloping Position Protection
5. Host Computer Watchdog
6. Wifi, FTP and SD Card Reader
Frame Materials70% Aluminium, 15% Stainless Steel, 5% Plastic, 5% Brass, 5% Others
MotorsNEMA17 Stepper Motors
Mechanical PrecisionY: 12.5umX: 12.5um
Pixel AccuracyAdjustable – (Default: 300 DP; roughly 0.81um Pixel Accuracy)
Engraving Area300mm*300mm
Available Laser ModulesLU3-20B – Optical Power: >20,000mW
LU3-20A – Optical Power: 20,000~24,000mW
LU2-10A – Optical Power: >9500mW
LU2-4 SF– Optical Power: 5,000~5,500mmW
LU2-4 LF – Optical Power: 5,000~5,500mmW
Wave Length445±5nm
FocusFixed Focus
Default Focal Length46mm (from the heat sink to the object)
Control ModePWM
Power RateS0-S1,000
Engraving Speed0-20,000mm/min
Baud Rate115200 – 921600 (Default: 115200)
Computer OSWin XP, Win 7, Win 8, Win 10 (LaserGRBL)
Mac and Linux (LightBurn)
Control SoftwaresLaserGRBL (free), LightBurn (Paid Software)
Input FormatJPG, JPEG, PNG, BMP, SVG, etc.
Available Materials of EngravingWood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.
Available Materials of CuttingWood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.
Input Voltage100-240~50/60Hz
Power Adapter Output 24V/6A
Operating Temp-5℃ – 50℃
        
RETOUR AU SOMMET