Materialreferenz – Ortur
          

Ortur Laser Master 2 Pro S2 & Aufero Laser 2 Materials Reference

 (S=Strength, 1000=100%)

Table header 0LU2-2LU2-4-LF LU2-4-SF Remark
1.6mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
400mm/min,M3,S1000
Number of passes: 1 
Cutting
300mm/min,M3,S1000
Number of passes: 1 
2.8mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
4.06mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
130mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1 
5.18mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors, Better Results.
Cutting
100mm/min,M3,S1000
Number of passes: 1 
Cutting
150mm/min,M3,S1000
Number of passes: 1
5.96mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes:2 
Cutting
100mm/min,M3,S1000
Number of passes: 1
7.85mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
【Reduce the focal length by 2-3mm during cutting】
Cutting
100mm/min,M3,S1000
Number of passes:9 
Cutting
100mm/min,M3,S1000
Number of passes:12
3.06mm Tung wood board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
500mm/min,M3,S1000
Number of passes: 1
Cutting
400mm/min,M3,S1000
Number of passes: 1
5.15mm Tung wood board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1
Cutting
250mm/min,M3,S1000
Number of passes: 2 
8.30mm Tung wood board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
250mm/min,M3,S1000
Number of passes: 3
Cutting
200mm/min,M3,S1000
Number of passes: 2
10mm Tung wood board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 2
Cutting
150mm/min,M3,S1000
Number of passes:3 
6mm Pine board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1
Cutting
100mm/min,M3,S1000
Number of passes: 1 
9mm Pine board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes: 3
Cutting
100mm/min,M3,S1000
Number of passes: 3
3mm Paperboard
(Cardboard Box)
Engraving
3000mm/min,M4,S1000
12Lines/mm
Engraving
9000mm/min,M4,S400
15Lines/mm
Engraving
9000mm/min,M4,S400
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,S1000
Number of passes: 2
Cutting
500mm/min,M3,S1000
Number of passes: 1 
Cutting
500mm/min,M3,S1000
Number of passes: 1 
0.1mm Colored A4 Paper
(Not White)
Engraving
3000mm/min,M4,S600
12Lines/mm
Engraving
9000mm/min,M4,S350
15Lines/mm
Engraving
9000mm/min,M4,S350
15Lines/mm
The white paper is nonopaque, the result is not very good.
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cutting
3000mm/min,M3,S1000
Number of passes: 1 
Cutting
3000mm/min,M3,S1000
Number of passes: 1 
250g Kraft Paper Engraving
2000mm/min,M4,S100
12Lines/mm
Engraving
9000mm/min,M4,S500
15Lines/mm
Engraving
9000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,M3,S1000
Number of passes: 1 
Cutting
1000mm/min,M3,S1000
Number of passes: 1 
Cutting
1000mm/min,M3,S1000
Number of passes: 1 
0.7MM Leather Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Cutting
100mm/min,M3,S1000
Number of passes: 1 
Cutting
800mm/min,M3,S1000
Number of passes: 1 
Cutting
800mm/min,M3,S1000
Number of passes: 1 
Non-woven fabrics
(0.5mm, Dark Color)
Cutting
500mm/min,M3,S1000
Number of passes: 1 
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cutting
1500mm/min,M3,S1000
Number of passes: 1 
Cannot cut the white one, it's transparent in fact.
5mm Acrylic Engraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Need coat the dark color paper onto the transparent Acrylic plate.
×Cutting
100mm/min,M3,S1000
Number of passes: 2
Cutting
100mm/min,M3,S1000
Number of passes: 3
Tin Wire Melting Melting Melting Cannot engrave.
Cobblestone ×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Ceramic ×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Powder Coated MetalPaint Sprayed MetalEngraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraving
10000mm/min,M4,S1000
15Lines/mm
Engraved in the layer of powder coating.
Plated Metal Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Anodised Aluminium Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Stainless Steel ×Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
It's the surface color turned to be other color.The Glossy finishing surface should be painted black by Marker Pen.
Copper × × ×
Pure aluminum ×××
Gold ×××
Silver ×××

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects.Also, please adjust the focal length to be the best, make the focal spot to be the smallest.
It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.

Aufero Laser 1 Materials Reference

 (S=Strength, 1000=100%)

Table header 0LU2-2 LU2-4-LF LU2-4-SF Remark
1.6mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
400mm/min,M3,S1000
Number of passes: 1 
Cutting
300mm/min,M3,S1000
Number of passes: 1 
2.8mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
4mm Plywood Plate Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
130mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1 
6mm Pine board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors, Better Results.
Cutting
150mm/min,M3,S1000
Number of passes: 1 
Cutting
100mm/min,M3,S1000
Number of passes: 1
9mm Pine board Engraving
2000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Engraving
3000mm/min,M4,S500
15Lines/mm
Darker Colors
Better Results
Cutting
100mm/min,M3,S1000
Number of passes:3
Cutting
100mm/min,M3,S1000
Number of passes: 3
3mm Paperboard
(Cardboard Box)
Engraving
3000mm/min,M4,S1000
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,S1000
Number of passes:2
Cutting
500mm/min,M3,S1000
Number of passes:1
Cutting
500mm/min,M3,S1000
Number of passes:1
0.1mm Colored A4
Paper
(Not White)
Engraving
3000mm/min,M4,S600
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
The white paper is nonopaque, the result is not very good.
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cutting
3000mm/min,M3,S1000
Number of passes: 1
Cutting
3000mm/min,M3,S1000
Number of passes: 1
250g Kraft Paper Engraving
2000mm/min,M4,S100
12Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Engraving
3000mm/min,M4,S300
15Lines/mm
Darker Colors
Better Results
Cutting
200mm/min,M3,S1000
Number of passes: 1
Cutting
1000mm/min,M3,S1000
Number of passes: 1
Cutting
1000mm/min,M3,S1000
Number of passes: 1
0.7MM Leather Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S600
15Lines/mm
Engraving
3000mm/min,M4,S600
15Lines/mm
Cutting
100mm/min,M3,S1000
Number of passes: 1
Cutting
800mm/min,M3,S1000
Number of passes: 1
Cutting
800mm/min,M3,S1000
Number of passes: 1
5mm Acrylic Engraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Need coat the dark color paper onto the transparent Acrylic plate.
Cutting
100mm/min,M3,S1000
Number of passes: 2
Cutting
100mm/min,M3,S1000
Number of passes:3 
Anodised AluminiumEngraving 2000mm/min,M4,S1000 15Lines/mmEngraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm

Stainless SteelEngraving 100mm/min,M4,S1000 15Lines/mmCutting
100mm/min,M3,S1000
Number of passes: 1 
Non-woven fabrics
(0.5mm, Dark Color)
Cutting
500mm/min,M3,S1000
Number of passes: 1
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cutting
1500mm/min,M3,S1000
Number of passes: 1
Cannot cut the white one, it's transparent in fact.
Tin Wire Melting Melting Melting Cannot engrave.
Cobblestone Engraving
100mm/min,M4,S1000
15Lines/mm
Engraving
100mm/min,M4,S1000
15Lines/mm
Need coated with acrylic dye heat transfer film.
Ceramic Engraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
Need coated with acrylic dye heat transfer film.
Powder Coated Metal
Paint Sprayed Metal
Engraving
2000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraving
3000mm/min,M4,S1000
15Lines/mm
Engraved in the layer of powder coating.
Plated Metal Engraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
Engraving
100mm/min,M4,S1000 15Lines/mm
The Glossy finishing surface should be painted black by Marker Pen.

The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest.
It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or previous to light, etc. Then, you need to use the marker pen to black it to engrave.

M3=Cutting Mode, M4=Engraving Mode, Conversion Tool: Line to Line Tracing
(S=Strength, 1000=100%)

MaterialsLU2-2 (≤2.1W)LU2-4-SF/LF (=5W)LU2-10A (=10W)LU3-20A/B (=20W)
MDF3000mm/min, M4, S700, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S400, 8Lines/mm
Plywood3000mm/min, M4, S700, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm15000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S800, 8Lines/mm
Pine 3000mm/min, M4, S700, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 8Lines/mm
Paulownia3000mm/min, M4, S700, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S700, 10Lines/mm20000mm/min, M4, S400, 8Lines/mm
Paperboard
(Cardboard Box)
3000mm/min, M4, S1000, 12Lines/mm9000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S700, 10Lines/mm20000mm/min, M4, S350, 8Lines/mm
A4 Paper
(Not White)
3000mm/min, M4, S600, 12Lines/mm9000mm/min, M4, S1000, 15Lines/mm3000mm/min, M4, S150, 10Lines/mm20000mm/min, M4, S350, 8Lines/mm
Kraft Paper 250g 2000mm/min, M4, S100, 12Lines/mm9000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S600, 10Lines/mm10000mm/min, M4, S1000, 8Lines/mm
Leather3000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S600, 10Lines/mm20000mm/min, M4, S300, 8Lines/mm
Black Acrylic 2000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S500, 8Lines/mm
Cobblestone100mm/min, M4, S1000, 15Lines/mm1000mm/min, M4, S1000, 15Lines/mm1000mm/min, M4, S250, 10Lines/mm2000mm/min, M4, S1000, 8Lines/mm
Ceramics 500mm/min, M4, S1000, 15Lines/mm1000mm/min, M4, S1000, 15Lines/mm5000mm/min, M4, S1000, 20Lines/mm10000mm/min, M4, S1000, 15Lines/mm
Coated Metal2500mm/min, M4, S1000, 15Lines/mm6000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S250, 10Lines/mm20000mm/min, M4, S250, 8Lines/mm
Plated Metal 100mm/min, M4, S1000, 15Lines/mm100mm/min, M4, S1000, 15Lines/mm1000mm/min, M4, S250, 10Lines/mm8000mm/min, M4, S1000, 8Lines/mm
Stainless Steel×100mm/min, M4, S1000, 15Lines/mm2000mm/min, M4, S1000, 10Lines/mm4000mm/min, M4, S1000, 10Lines/mm
Glass 500mm/min, M4, S1000, 15Lines/mm1500mm/min, M4, S1000, 15Lines/mm5000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 8Lines/mm
Knit4000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S500, 8Lines/mm
Cotton 4000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S500, 8Lines/mm
ABS Plastics4000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 15Lines/mm20000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S500, 8Lines/mm
Bamboo 3000mm/min, M4, S1000, 15Lines/mm7000mm/min, M4, S1000, 15Lines/mm15000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S650, 8Lines/mm
Silica Gel400mm/min, M4, S1000, 15Lines/mm1000mm/min, M4, S1000, 15Lines/mm2000mm/min, M4, S1000, 10Lines/mm4000mm/min, M4, S1000, 8Lines/mm
Rubber 2000mm/min, M4, S1000, 15Lines/mm5000mm/min, M4, S1000, 15Lines/mm10000mm/min, M4, S1000, 10Lines/mm20000mm/min, M4, S1000, 8Lines/mm
Ceramic Tile2000mm/min, M4, S1000, 15Lines/mm4000mm/min, M4, S1000, 15Lines/mm8000mm/min, M4, S1000, 10Lines/mm16000mm/min, M4, S1000, 8Lines/mm
Tin Lead Ore××××
Copper××××
Silver
××××
Gold××××
Pure Aluminum
××××
Soap××××
White Foam××××
Transparent Acrylic××××
  • The results would be different in even the same material with different finishing or different colors. So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, and make the focal spot to be the smallest.
  • It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. You need to use the marker pen to black it to engrave.
  • When the laser engraver is working, the operator must pay close attention and not place it alone to prevent the-engraved material from catching fire. If possible, we recommend that you purchase a fire extinguisher and keep it close to the machine.
  • Please check the documentation of ortur, find the corresponding software tutorial, and modify the corresponding value.
        
ZURÜCK NACH OBEN