Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver

The 20W laser module is not only upgraded in terms of power, it applies advanced COS technology, which presses four 5W diodes into an extremely fine beam and maintains a powerful energy, enabling speeds of up to 20,000mm/min and perfect single cuts. In addition, it can also achieve colorful engraving effects on stainless steel, so you are no longer limited to black and white creations.

It is important to note that the 20W laser module is compatible with all of Ortur's laser engraving machines, but don't worry, the installation of the 20W laser module is very simple. This article will explain in detail how to install the 20W laser module on other laser engraving machines and there will be a video tutorial, so be sure to read it carefully!

Installed on Ortur Laser Master 3

· Install and fix the LU3-20A laser moudule with thumbscrew.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 1

· Because of the power upgrade, the 20W laser module needs to be used with an OUC adapter board. Please note that when fixing the OUC adapter plate, please reserve the movable position of the laser module.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 2

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 3

· Plug the LU3-20A laser module laser dedicated line and the OLM3 cable into the corresponding position on the adapter board.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 4

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 5

· The OUC requires an external power supply.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 6

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 7

· It is necessary to install the limit screws into the second hole, so that the module will not collide with the frame, and at the same time, the engraving area will become 400mm*380mm.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 8

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 9

The above are installed after the 20W laser module is installed, it is best to use with the air pump together!

After all the above are installed 20W laser module is installed, it is best to use with the air pump.If you are still not sure how to operate, you can view the detailed installation video below.

Installed on Ortur Laser Master 3 LE

· Replacement of the 20W laser module, removal of the OLM3 LE original fixing bracket.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 10

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 11

· Attach the fixing bracket for the OUC adapter plate.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 12

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 13

· Plug all laser harnesses into the corresponding ports

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 14

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 15

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 16

· The OUC requires an external power supply.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 17

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 18

· All wiring harnesses need to be organized to ensure that they do not interfere with the movement of the laser module. And you need to adjust the position of the limit screws to prevent collisions.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 19

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 20

The above are installed after the 20W laser module is installed, it is best to use with the air pump together!

Installed on Ortur Laser Master 2 Pro S2

· If your old laser module is the LU2-4 SF/LF, you will need to replace the back plate that holds the laser module in place.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 21

· Connect the wiring harness of the 20W laser module and the wiring harness of the OLM2 PRO S2 to the corresponding excuses on the OUC adapter board.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 22

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 23

· Connect the OUC adapter plate to the dedicated power supply and tie the OUC in a position where it will not interfere with the operation of the machine.

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 24

Tutorial of installing the LU3-20A Laser Module on Ortur Laser Engraver 25

· In order to prevent the laser module from hitting the front frame, please adjust the limit screws and adjust the tension of the belt at the same time.