Aufero laser 1 Installation & Use Video
Easy to install within one minutes
1 .Ortur Technologies
2. Budget-Friendly Price
3. Plug & Play Laser Engraver
1.The whole machine does not need to be installed, plug and play
2.Worry-free after-sales service
It's unnecessary to laboriously learn how to install, easy to use. Suitable for new players and experienced players. The real plug and play laser engraver for everyone!
It takes 30~60 minutes to install the same type of entry-level laser engraving machine, and we only need 1 minutes to use it！
Aufero Laser 1 - Parts List
·Machine × 1 ·Laser Goggles × 1 ·Power Adapter × 1 ·USB Cable × 1 ·Hex Wrench × 1 ·Brush × 1 ·Angle Fasteners × 4 ·2.0mm Allen Wrench × 1
·Cable Ties × 2 ·Acrylic Plate for Testing × 1 ·Anodized Aluminum Plate for Adjusting Focus × 1 ·LU2-4-SF Laser Module × 1 ·Focal Gauge Board × 1 ·Thumb Screw × 1
9th Generation 32-Bits Motherboard
The latest and advanced motherboard of Ortur
1. Driver Free use on most modern operating systems. (for Windows XP and Windows 7 driver required)
2. Higher MCU frequency at 240Mhz and about 10% faster calculation speed than 8th motherboard.
3. Support next generation Digital Laser Module.
LU2-2 Fixed Focus Laser Module
Optical Power: 1,000-1,600mW
Focal Spot: About 0.07×0.06mm
It has a smaller Luminous Cavity, so it has a smaller focal spot and good at engraving high-precision pattern.
LU2-4-SF Short Focus Optically Compressed Laser Module
Optical Power: 4,500-5,500mW
Focal Spot: About 0.12×0.15mm
It has a compressed laser spot, so it's good at cutting and better at engraving harder materials.
LU2-4-LF Long Focus Optically Compressed Laser Module
Focal Spot: About 0.17×0.25mm
It has a longer depth of field, so it's good at engraving and better at cutting.
Ortur Laser 1.8 Firmware
Based on OLF1.7 firmware,the 1.8 firmware has optimized the grayscale engraving algorithm to bring more realistic picture effect.
It could support any baud rate,save some delays due to command transmission,increase the engraving speed. The engraving speed can be as high as 5000mm/min.
Aufero Laser Engraver can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10, and also support MAc and Linux system (LightBurn, need paid), engraving file format supports BMP, JPG, PNG, JPEG, SVG etc.
1:Active Position Protection
2:Exposure Duration Detection and Limitation
3:Laser Beam Safety Guard
4: Power control system, if shutdown the machine, it would cut the power.
1. Optional YRR2.0
2. Y-axis Rotary Roller
lt's optional, you could buy it separately, and use this auxiliary device to work with Aufero Laser 1 for engraving cylindrical objects.
Z-Height Lifting Device
Compatiable with Aufero Laser 1
Let you ajust focal distance more easily
Enjoy The Fun Of DIY