No Products in the Cart
Laser Master 2 Pro Installation & Use Video
00:02-04:25
Section One: Laser Master 2 Pro Installation
04:26-06:53
Section Two: Preparation Before Engraving
06:54-07:52
Section Three: Start Engraving
07:53-07:54
Section Four: Works Exhibition
Tutorial File For New User
Download"Presently ORTUR is a known reference name in the world" The commitment of expanding and improve the technology of diode laser engravers is one of ORTUR's top priorities.
[Product advantage] Ortur Laser 1.8 firmware,qualified for ESP32 MCUs, optimizes the motion algorithm,and increases the maximum stepper motors speed from 4000mm/min to 10000mm/mm.
Stop the operation of the machine at any time, flame detection and warning.
Size: 380 × 322mm
The fastest engraving
speed
Time: 2hours 56minutes
Size: 380 × 322mm
The fastest engraving speed
Time: 5hours 5minutes
Optical Power: 1,000 - 1,600mW
Focal Spot: 0.07 × 0.06mm
It has a smaller Luminous Cavity,
so it has asmaller Focal Spot and good at
engraving high-precision pattern.
Optical Power: 4,500 - 5,500mW
Focal Spot: 0.12 × 0.15mm
It's high power and has a Compressed Laser Spot, so it's good at
cutting and better at engraving harder materials.
Optical Power: 4,500 - 5,500mW
Focal Spot: 0.17 × 0.25mm
It's high power and has a longer Depth of Field, so it's good at
engraving and better at cutting.
Air Source (compressor) not included in the package Ortur recom
More power, lower current,
safer, support to expand
more add-ons.
Cable chain accommodating
wires,
beautiful and clean.
A scale is printed on the
aluminum
profile for easy
position adjustment.
Full sheet metal + aluminum
profile body,
when fast
engraving machine, the body
does
not shake, and the
machine runs more stably.
Tighten the screw to adjust the
tightness to adjust
the focus.
The focus accuracy control is
not precise enough,but the
laser module is lighter in
weight,
and faster engraving
speed can be used.
Turn the knob by hand to get a precise focal length, with delicate engraving and cutting effects. However, the overall laser module is heavier and cannot use higher engraving speeds.
It's optional, you could buy it separately, and use this auxiliary device to work with Laser Master 2 Pro for engraving cylindrical objects.
It's optional, you could buy it separately, to build
Laser Master 2 Pro
to be a enclosed laser engraver
with an exhaust system for fumes that
would make
the users safer to use on more materials and limit
eye
exposure to the laser.
Large Engraving Area to Achieve More Creativity
[Product advantage] Ortur Laser 1.8 firmware,qualified for ESP32 MCUs, optimizes the motion algorithm,and increases the maximum stepper motors speed from 4000mm/min to 10000mm/mm.
Stop the operation of the machine at any time, flame detection and warning.
OLM-2 Pro S2
Size: 380 × 322mm
The fastest engraving
speed
Time: 2hours 56minutes
Other Machine
Size: 380 × 322mm
The fastest engraving
speed
Time: 5hours 5minutes
Original Photo
Engraving Effect
Optical Power: 1,000 - 1,600mW
Focal Spot: 0.07 × 0.06mm
It has a smaller Luminous Cavity,
so it has asmaller Focal Spot
and good at
engraving high-precision pattern.
Optical Power: 4,500 - 5,500mW
Focal Spot: 0.12 × 0.15mm
It's high power and has a Compressed Laser Spot,so it's good at
cutting and better at engraving harder materials.
Optical Power: 4,500 - 5,500mW
Focal Spot: 0.17 × 0.25mm
It's high power and has a longer Depth of Field,
so it's good at
engraving and better at cutting.
Air Source (compressor) not included in the package Ortur recom
More power, lower current,safer,
support to expand
more add-ons.
Cable chain accommodating
wires,
beautiful and clean.
A scale is printed on the aluminumprofile
for easy
position adjustment.
Full sheet metal + aluminum profile body,when fast engraving machine, the body does not shake,and the machine runs more stably.
Assemble the machine in about 15 minutes
Use Arbitrary, Unfettered
Standard
Tighten the screw to adjust the tightness to adjust the focus.The focus accuracy control is not precise enough,but the laser module is lighter in weight,and faster engraving speed can be used.
Optional Parts
Turn the knob by hand to get a precise focal length, with delicate engraving and cutting effects. However, the overall laser module is heavier and cannot use higher engraving speeds.
It's optional, you could buy it separately, and use this auxiliary device to work with Laser Master 2 Pro for engraving cylindrical objects.
It's optional, you could buy it separately, to build Laser Master 2 Pro to be a enclosed lase engraver with an exhaust system for fumes that would make the users safer to use on more materials and limit eye exposure to the laser.
Large Engraving Area to Achieve More Creativity
Product Name
Diode Laser Engraver
Product Model
Laser Master 2 Pro S2
Engraving Area
X400*Y400MM
Net Weight
3.5KGS
Gross Weight
4.6KGS
Product Size
600*570*189MM
Product Material
Aluminum Profile + Sheet Metal
File Format
Jpg / Jpeg / Png /
Bmp / Svg / Etc
Box Size
660*250*110MM
Control Software
LaserGRBL ( Free ), it could only support Windows OS.LightBurn ( Not free), it could support Windows,MAC and Linux.
Rated Power
24V 2A 48W
Artistic Creation
Soft Outfit Design
Toy Puzzle
Manufacturing
Logo & VI Design
Life Record
Wood
Glass
Food
Stone
Oxidized Metal
Stainless Steel
Ceramic Tile
Phone Case
Acrylic
Paper
Plywood
Thin Leather
Note: The above work is done by LU2-2 or LU2-4-LF or LU2-4-SF laser module,
but
each model of laser module has a different focus. LU2-2 is suitable for fine carving;
LU2-4-LF is more suitable for cutting; LU2-4-SF can achieve a certain effect in both
carving and cutting.