Aufero AL2 Laser Engraving & Cutting Machine 15,000mm/min (5W/1.6W)

Sale price$399.99
Sold out
5.0

Tax included. Shipping calculated at checkout


  • The Fastest Entry-level Laser Engraver, up to 15,000mm/min when the stable situation.
  • Designed with low gravity center of the X-axis, providing more stability.
  • 4 Safety Protection: Active Position Protection, Exposure Duration Detection and Limitation, Laser Beam Safety Guard, Current Safety Control System.
  • Aufero Laser 2 enjoys a 30-day return guarantee and a one-year warranty.
Aufero AL2 Faster Than the Typical

A Lot Faster Than the Typical

32-Bit MCU on the 9th Generation Motherboard Stepper motor speeds can be increased from 4000mm/min to 10,000mm/min or even 15,000mm/min thanks to the ESP32 MCU's motion algorithm and a low center of gravity.

Aufero AL2 The Installation Takes Only 10 Minutes

The installation takes only 10 minutes

Whether or not you have already used a laser engraving machine, this is the best high-performance machine for novices.

Aufero AL2 Secure Design

Secure Design

A laser filter cover blocks 98 percent of the UV radiation. A light filter cover is attached to the laser head to keep animals from grabbing the laser spot. The laser will immediately shut off to prevent any harm if the machine is tilted or shifted, if the computer fails during engraving or if the motors stop moving.

Aufero AL2 Newest Compressed Focal Spot Laser Beam Innovations

Newest Compressed Focal Spot Laser Beam Innovations

Cutting depth of up to 12mm thick wood, 10mm acrylic, carving ceramics, and stainless steel can all be done with the latest Aufero AL2 5.5W high-compression focal point laser module diode.

【10W】Wood & Acrylic Cutting

One PASS-Without Pump

Aufero AL1 10W 12mm Wood Cutting

Wood (12mm)

Aufero AL1 10W 10mm Acrylic Cutting

Acrylic (1Omm)

Richer Application Scenarios

Basic Accessories

Significantly improves the engraving and cutting experience

Raising the Machine Height

Suitable for engraving and cutting taller objects, can be used with the Y-axis series

Multi-mode Y-axis Rotary Chuck

Suitable for engraving and cutting most cylinders, spheres and rings

For Safer Engraving

Provide you with a more secure engraving and cutting experience

Technical Specifications

Aufero AL2 Technical Specifications
Aufero AL2 Package Lists1
Aufero AL1 Packing List 2
Aufero AL1 Packing List Laser Module Comparison