










Ortur LM3 10W/20W Máquina de grabado y corte láser
- Velocidad de 20.000mm/min, le proporciona trabajos más perfectos en menos tiempo.
- Aumenta la potencia óptica a 20W, grabando 380+ colores en acero inoxidable.
- Punto cuadrado 0.08*0.08mm, presentando 256 tipos de grabado en gris.
- Láser de 20W con Bomba de Aire Ortur 1.0 GRATUITA, con tubo de aire incorporado para reducir las marcas de quemaduras en un 50%.


More Precise Cutting & Engraving
The 4th beam combining technology with double compression spots.

Higher Precision
The Improved Mechanical Structure
Focal Spot 0.05x0.1mm
Bring Delicate Details at 0.01mm

12mm Wood Cutting in One-pass

10mm Acrylic Cutting in One-pass

Pine Board, Maximum Cutting Thickness 20mm

Acrylic Sheet, Maximum Cutting Thickness 30mm

The Latest Smart Laser Engraver Solution
From Ortur Laser Application Technology Lab
The 11th Generation of Laser Motherboard
The V2.0 Series Smart Laser Firmware

More Innovative Designs
YRR Switch
Emergency Stop Button
WIFI+Power Port+USB Serial Bus
U Disk+Security key
8 Safety Features
Protection in Every Detail
Top 8 safety features including USB connection monitoring and current-voltage control system create an all-around safe engraving condition for you.


Active Position Protection

Tilt Motion Detection

Laser Exposure Time Limit
All Levels Compatible with Your Creativity
ORTUR offers a simple or professional mode selection for your every engraving stage.

Richer Application Scenarios
Basic Accessories
Significantly improves the engraving and cutting experience
Multi-mode Y-axis Rotary Chuck
Suitable for engraving and cutting most cylinders, spheres and rings
Extension kit
Replacement of the Y-axis and assembly on the machine to increase the working area
For Safer Engraving
Provide you with a more secure engraving and cutting experience
Package Lists
FAQ
Which model should | choose, 20W or 10W?
If you pursue efficiency and have higher cutting requirements, please choose 20W;
If you pursue fineness and engraving precision, then 10W fits you.
Will the 20W machine be equipped with a free air pump?
Yes, when you buy a 20W machine you will also get an air pump. The air pump will cooperate with you to create better and prolong the service life of the laser module.
What kind of machines does the LU3-20A laser module fit?
All Ortur and Aufero machines (OLM3, OLM3 LE, OLM2PROS2, OLM2S2, AL1, AL2).
It is necessary to use the OUC board for connection.
About the choice of accessories recommended
The Air Assist Set and Engraving Platform are must-haves. Air Assist Set blows away the dust on the laser head, making your project clean without burn marks and protective lenses.
Processing on honeycomb avoids laser shooting at your desk. 90% of users also order YRC1.0 for cylindrical processing, like tumbler engraving, Christmas ball crafting, and ring engraving.
If you need to engrave or cut a large area, you can use the extension accessory, which can be extended to 830*400mm.
Use indoors with Enclosure 2.0 and a smoke purifier to protect clean indoor air.
About references on machine engraving & cutting parameters?
Please check below:https://ortur.net/pages/materials-reference
Can the OLM3 20W be used with the Z-Height Adjuster?
Yes. The Z-height adjuster can be adapted to all modules. However, please note that when used with OLM3 20W, an additional limit block is required and the engraving area is reduced to 400*355mm. Install tutorial video: Tutorial of the use of Z-axis on 20W module - YouTube